EN
How to locate leaks at the flange joint on a pipe 1
Locating the source of a leak on a flanged pipe fittings can be difficult. First look for any signs of moisture or dripping around the flange. Occasionally, you might hear a high-pressure hissing noise if the leak is large enough. Do be sure to clean the area so you can see better.
Basics on how to tighten your bikes bolts
Bolts coming loose can be the bane of flange connections. If the bolts are not tight, that seal may fail, and leaks can occur. First off, you’ll want to get yourself a wrench that fits on the bolts. Screw each bolt a bit at a time and in a cross-pattern. This means not over-tightening one bolt and then moving on to the next.
How to combat flange pipe connections against corrosion
The enemy of flange connections is even corrosion. It can corrode the metal and lead to leaks. To address corrosion, start by scrubbing away any rust or buildup noted on the flange and pipes. A wire brush and a cleaning solution for whatever type of metal the pipe fittings & flanges are made of can also make short work of the buildup. After cleaning, you might want to give the exposed surface a coating of a protective agent that can help stave off future corrosion.
Guaranteeing a tight flanged pipe
A good seal is also crucial to keep out leaks. Before you marry the gasket to the flange, make certain that each surface is clean. Any dirt or debris will interfere with a close seal. When placing the gasket, align it carefully and ensure it is even all the way around. When everything is aligned, you can now tighten up the bolts in the cross pattern I discussed earlier to evenly distribute the pressure.
Why and how to check gaskets
The small, but powerful, component of the flange connection is the gasket. It’s what effectively seals the gap in the flange faces. Gaskets can degrade or break down over time, which can cause leaks. Periodically check the gasket for wear or damage. If it’s not in good shape, replace it. To replace a gasket, y ou remove the old gasket and clean the surface. Then, slide the new gasket into place and tighten everything back up.
Conclusion
Keep in mind that maintaining your bolted pipe flange connections connections is a key part of system maintenance! Seriously! Regular check ups and maintenance can save you a whole lot of hassle later. At Yongtong we dedicate ourselves to provide the best in quality service and products that can withstand the rigors of the most demanding user.
